Comments on: IMPRESA Grinder Impeller for Breville BCG800XL Smart Grinder Pro and More – Fix Jams in Your Coffee Maker with Burr – Impeller Replacement Part

By: Jeff

Jeff — Sat, 08 Feb 2025 19:35:53 +0000

Search on youtube for information on installing this.

By: Maxime Thibeault-Chabot

Maxime Thibeault-Chabot — Sat, 08 Feb 2025 19:35:53 +0000

Donât loose your time. I have the dose control.

By: JT

JT — Sat, 08 Feb 2025 19:35:53 +0000

Great fix for a known problem with Breville grinders
I was going to sell my Breville grinder for parts before I found this solution to a common problem known about that causes clogging. The installation took a while, but that is because of the design of the grinders. Once installed the solved my problem 100% and saved me from buying a new grinder for $300+. Great product.

By: Wondering

Wondering — Sat, 08 Feb 2025 19:35:53 +0000

Donât buy this unless you want to ruin your grinder.
This $5 piece ruined a $200 grinder and yes I installed it correctly. It doesnât fit and burns up the motor. Horrible replacement shame on the company.

By: N. Cole

N. Cole — Sat, 08 Feb 2025 19:35:53 +0000

Got me back in business!
This one worked for me. It might need to be taken back apart with some adjustments made to lower the impeller or the washers it sits on as I lost a good deal of the coarse range of the grinder. I don’t use that range so I’m not in a hurry to do so though.

By: Shtery

Shtery — Sat, 08 Feb 2025 19:35:53 +0000

Solved the problem
Worked well. Was a little worried that it was too big. It was hard to get in. It was touching the sides. But it works. It will wear off eventually. Now I need to find the felt washer

By: Rick Fernando

Rick Fernando — Sat, 08 Feb 2025 19:35:53 +0000

fits perfectly and works great . Very happy with my purchase..

By: kin

kin — Sat, 08 Feb 2025 19:35:53 +0000

My Sage Dose Control Pro was starting to jamand cut out when it was grinding. After some research, it was due to the impeller’s teeth wearing out. After some research, I came across this replacement (Sage/Breville do not have replacement impellers, poor show Sage!) followed an easy how to video online and now my grinder is working perfectly. Now will have many more years of use with no need to replace and add to landfill!

By: Jam

Jam — Sat, 08 Feb 2025 19:35:53 +0000

Fixed my grinder BCG800

By: Pavel S.

Pavel S. — Sat, 08 Feb 2025 19:35:52 +0000

Great solution, no more jamming
Used this to upgrade/fix my BCG800XL which was jamming all the time. Old impeller was severely worn, to the point where I had to remove the burrs and clean packed grounds from the chamber every couple of days. This part completely fixed the issue. Make sure to read and follow the instructions on the ifixit site! I have lost one of the 2 washers under the impeller, as a result the new part sits a bit too low, and now I have the grind adjustment at the finest setting (used to be ~ in the middle). But it works great, and no more jams! Big thanks to the engineer who not only found a solution, but also took time to make it available to others, and make a super detailed write-up