Dreo All-in-1 BaristaMaker Milk Frother, Electric Foam Frother for Latte Art Microfoam and Coffee, 15oz/450ml Automatic Milk Warmer with 30 Drinks, Dishwasher Safe, Dairy/Plant-Based Milk

Best Purchase Ever!
Update 3/26/25 – I measured the amount of whole milk on a scale when poured to the minimum line inside the pitcher: 179 grams give or take of whole milk. I have no idea of that is a lot or a little. Like I said in previous updates to this review, I go through whole milk a lot faster but I still use this device every single day, sometimes twice a day.Update 3/14/25 – There are two spinner thingies that go into the center of the pitcher: one for Froth Mode (on the left side of the touchscreen) and one for the Stir Mode (on the right of the touchscreen). I actually haven’t used the Stir Mode spinner disk and Stir Mode to make any drinks yet. I have only used Froth Mode because I just use whole milke, latte setting. Anyway, the top big propeller part of the spinning thing for Froth Mode came out once while I was cleaning it. I was able to pop it back in vertically. But it’s slightly wobbly now if you move it around slightly. I don’t remember if the wobble was already there from the beginning. This hasn’t affected the froth results though (same froth as before) and the propeller part hasn’t fallen out on its own since.Also, tip: Pour the frothed milk into your drink right away for best results. I think if you let it sit, it separates more, so you can swirl it around in the pitcher before you pour it in.Also, I usually fill the pitcher to the minimum line and I do pour all the frothed milk into my one cup (previously, I said I split it into two cups because the minimum quantity line in the pitcher feels like a lot of milk) because I’m the only one making a cup of coffee/tea in the morning. Basically, I’m saying it seems like a lot of milk but it seems fine in the end taste-wise.Update 3/6/25 – I wanted to add to my review that another nitpick thing I’ve found is the amount of milk that is required for the minimum line. I used to just pour in a little whole milk to my coffee (cold, I know, *shudder*). Anyway, the minimum line, which doesn’t even include the area where you need to pour for latte art, is in my opinion a lot of milk. I usually pour half of the frothed milk to another cup of coffee for someone else and pour half for myself. You may think that the amount of frothed and heated milk from the minimum or latte art area (just above the minimum line) is good for one cup of coffee. Bottom line, I run out of whole milk a lot faster now using the minimum line for the whole milk, latte setting.Update 2/28/25 – So I have owned this product for over a week now. I have used it EVERY SINGLE DAY. I still haven’t figured out how to pour the foam (whole milk, latte setting) to make actual latte art. I don’t know if it’s actually possible to make very nice latte art from this machine, but I am not a professional barista by any means. Secondly, you do have to use a sponge to clean the bottom of the pitcher after whole milk at least because a milky residue remains even after swirling water inside the pitcher to “clean” it.Original review – This machine is amazing. It actually works. The foam is micro enough that it mimics what you buy at the fancy coffee shops or big box coffee shops. I’m obsessed. Also does foam almond milk, there is an almond milk setting. I love that you just pour the milk in and touchscreen what you want In 3 ish minutes you have foam to top off your coffee or tea. I love that it heats the milk up too and foams it. This is way better than a hand electric whisk because it’s set it and forget it. If this breaks, I’m getting another one. One of those kitchen gadgets I actually use everyday in addition to my electric kettle. Now I’m spoiled and expect foam with all my matchas and coffees ha!

Works well for milk
Have only used for milk but works very well.

Stopped working in less than a month
I was in love with this milk frother but after using it daily for two weeks, from out of nowhere the motor started making a grinding noise and it would no longer spin adequately to foam the milk. Before that it worked great with all kinds of milk, dairy and non-dairy. I am returning it and am hesitant to buy the same one. However, I don’t see any other reviewers who had the same problem so maybe this was just a one-off defective item.

Major disappointment
Very disappointing it does only one thing compared to what it says multiple features. It does only one kind of froth cold or hot, the thick froth is just the same as cappuccino froth. The minimum amount required amount of milk to make a froth is a lot like twice the volume of one cup hence too much waste and so what would I do with the excess yes drink it or make another cappuccino for who?

ليس مناسب لدولة الإمارات

كهرب 110!!! , ومقبس الكهرباء لا ينطبق على مقايسس السعودية وصلني المنتج متاخر جدا وصناعه صيني وهي مفترض تصير امريكي ولا تضبط اعدادات مهمها حاولت تضبط نفسها كل مره بطريقه مختلفه وسعرها جدا غالي مفترض تكون ٩٠ دولار طلعت لي ب ١٤٠ دولار !!! شامل ضريبة رسوم الاسترداد غير راضي عن المنتج خصوصا مواصفات المنتج لا تتناسب مع هئية مقاييس و معايير لدولتي كنت اتمنى يكون مقبس مناسب و جهد كهرب مثل ماهو معتاد عندنا ٢٢٠ للاسف خائب للأمل

This Dreo Frother is a more professional unit for those who want to play around with latte art and for those who have ‘expectations’ for their coffee. I am by no means a barista, but I do enjoy a good cup of coffee with a smooth finish provided by the milk. I do have a different unit by Paris Rhone, but there are a few things this Dreo unit really outperforms it that I would opt for the Dreo in comparison, and one of the biggies for me is the interior surface of this particular unit – all stainless steel, much preferred to one with coating. The milk isn’t heated up very much, but still the coating bothers me, I have to be super careful when washing, but with this Dreo unit, washing is as easy as 1-2-3.One thing I thought was odd, was that no where was I able to find the capacity of this frother, and I still can’t see it on the ad after relooking. But, if you are curious, the minimum line is about 240mL, max foam line is 380mL and max stir is about 475ml (give or take 10ml for all). At first, I was a little disappointed to see such small capacity in comparison to how large the unit was, but it actually did not take up too much counter space (since it’s tall rather than wide), and I usually don’t make that much. I like the removable top carafe, makes it easy to wash. And the magnetic attachments are great, especially since I sometimes forget to put it in before the liquid and you cannot see the insert with milk inside.I’ve switched to oat milk recently and the barista oat milk works really well, I’m hooked and have been using this frother everyday, experimenting with latte, and different types of foam, it’s pretty fun. Much smoother coffee!