Comments on: Coffee Grinder Single Dose Hopper for Eureka Mignon Grinder 2 in 1 Function Coffee Grinder Accessories Hopper Hand Pressure Silicone Bellow to Clean and Collect Coffee Grounds

By: Thomas LP

Thomas LP — Thu, 20 Feb 2025 23:45:58 +0000

Juste gÃ©nial, il fit parfaitement avec mon silenzio !!

By: Mathias

Mathias — Thu, 20 Feb 2025 23:45:58 +0000

Der Trichter passt gut verarbeitet wackelfrei perfekt auf die Eureka Mignon Perfetto. TatsÃ¤chlich kein Totraum (weniger als 1/4 Kaffeebohne blieb Ã¼brig im Mahlvorgang. Somit kein Springen von Kaffeebohnen beim Mahlen durch gute Geometrie des Trichters Gut funktionierender Balg mit 80g schwerer Abschlussplatte, auf der man guten Druck ausÃ¼ben kann fÃ¼r das Ausblasen von Restmaterial. Der Silikon-Balg wirkt gut verarbeitet. Die schwarze Optik passt gut zur roten MÃ¼hle.

By: TURKI SAUD ALSUBAIE

TURKI SAUD ALSUBAIE — Thu, 20 Feb 2025 23:45:58 +0000

Amazing, it fits perfectly to my Eureka Mignon Specialita.

By: Alessandro

Alessandro — Thu, 20 Feb 2025 23:45:58 +0000

L’accessorio si adatta perfettamente al macinacaffÃ¨ Eureka Mignon SpecialitÃ (Ã¨ compatibile anche con altre marche/modelli) e permette di trasformarlo in un macinacaffÃ¨ monodose con ritenzione zero: infatti grazie alla sua particolare conformazione Ã¨ in grado, grazie alla pressione dell’aria, di far uscire tutto il caffÃ¨ (precedentemente pesato) dalla camera di macinazione. Ottimi i materiali utilizzati e inoltre nella confezione Ã¨ incluso un utilissimo doppio pennello di eccellente fattura per la pulizia del vostro macinacaffÃ¨.

By: Arturo

Arturo — Thu, 20 Feb 2025 23:45:57 +0000

Best accessorie for Eureka
Great product, excellent quality, works really good… Best accessorie for eureka grinder

By: C. C. Jones

C. C. Jones — Thu, 20 Feb 2025 23:45:57 +0000

Simple installation, effective in converting to single dosing
I considered the single dose model of the Eureka Mignon, which has a bellows very much like this and is at a 30 degree angle. That one was quite expensive. Getting the very attractively priced Whole Latte Love exclusive Mignon Facile (Exactly like the Silenzo only without the grind timer, for like $100 less) plus this single dose hopper plus 3D printing a perfectly fitting stand that puts it at a 30 degree angle basically got me something very close to the single dose model for a whole lot less money.I prefer single dosing as I like to keep the beans stored in a vacuum canister rather than leaving some in a hopper on top of the grinder to oxidize. I can weigh out exactly what I need, and the reality of this single dose hopper is that it does actually effectively blow out most of the residual grounds. Without it, retention would be somewhere around 1.0-1.3g, but this gets you to somewhere under 0.3g retained. What you put in is virtually the same as what comes out. With the last tiny bit of what was retained last time being replaced by the small retention this time, you should pretty much land on the dose you were expecting.You’d think that even with higher retention that “old retention out / new in” gets you close as well, but keep in mind that just less than 0.3g being retained is far less stale oxidized grounds to be mixed in with your fresh dose rather than 1.3g or so, which is more significant. Also, less retention means that there is less opportunity for variability in how much ends up in your dose. Having much more left in the burrs just increases the possibility that a different dose results than expected as it’s more to possibly come out next time or maybe it retains a lot more from shot to shot. Anyway, one less variable, or at least minimizing one of them.My only complaint is that this thing is probably slightly more expensive than I’d have expected for what it is, which is a not very complex few pieces made from materials that aren’t super costly, but I’m guessing it’s one of those things where there are design and development costs and maybe not a massive volume to be sold so the unit price ends up needing to be higher than you’d figure to get them to a point of making something from it. Fine. For me it’s still well worth it.

By: Sean

Sean — Thu, 20 Feb 2025 23:45:57 +0000

It works
There really isn’t much more to say; it goes on easily, the cap comes off effortlessly, it feels like high quality, looks great, and just works.

By: Paul Goodman

Paul Goodman — Thu, 20 Feb 2025 23:45:57 +0000

Eureka espresso grinders need bellows like this. This is a good one, with a minor issue.
If you have a Eureka grinder you know. They are arguably the best espresso grinders for home use. But they have a strong tendency to get clogged up, because of a little metal screen at the top of the chute. If you don’t blow it out with a bellows very frequently, fine grounds accumulate and clog it up. You can disassemble and clean it but who wants to do that? With a good bellows you can blow the grounds through. It’s best to do that after every use.This one has four collapsable stages, which is better than those with 2 or 3. It works great.Some reviewers have noted some problems, and initially I did, too. The main problem is that it doesn’t come with any instructions and it is possible to use it in multiple ways. Only one of them works right.If you try to leave it in place and take the top off to add coffee, you’ll be disappointed. The top is hard to remove, while the whole bellows tends to fall off the grinder when you do. It comes with a big black rubber band. Perhaps that is meant to hold the bellows in the grinder? Who knows. Maybe that’s meant for use with another brand of grinder? The paperwork that came with the bellows indicates it’s for several different brands of grinder, not just the Eureka Mignon.The way this device works properly is to remove the bellows every time you add beans. Don’t pull the top off, and don’t try to make the bellows stay in the grinder. Forget the rubber band. It’s very simple and easy.When you add beans with the bellows removed, there’s only enough space for about one dose. That’s OK.

By: Nick H

Nick H — Thu, 20 Feb 2025 23:45:57 +0000

Exactly what I was looking for
Works like a charm. Installed in my Eureka Mignon Notte (aka the Manuale) in seconds, just like the normal hopper does, great fit. The silicone bellows is sturdy enough that it doesn’t sink with the lid on, but compresses easily. Pumped it after first installing, and got an entire gram (when you’re dealing with 17g doses, that’s a pretty significant amount) of ground coffee out that was just sitting in the machine.My only gripe, and it’s a minor one, is that the lid is a bit awkward to remove, it sits flush with the bellows, which looks nice, but makes it tricky to get a grip. My solution: squeeze the bellows from the sides and then grab. Easy enough to work around.

By: Kinan Hadiry

Kinan Hadiry — Thu, 20 Feb 2025 23:45:57 +0000

Very nice and great addition to your grinder
It’s a great upgrade to your grinder, the metal cap feels premium and the bellow Is a good quality.My retention has dropped from almost 1.5-2 grams to less than 0.3 grams.I just wish if there is no branding on the metal plate it would have been nicer.